How to Clean a jacuzzi. The jacuzzi is one of the most relaxing areas of the house and should always be kept clean. For the jacuzzi remain in good condition for a long time, it requires care and cleaning.
If you do not know how to clean your hot tub, do not worry. Here I leave some tips on how to clean a jacuzzi.
1. When we are in the hot tub use different products to increase relaxation soaps, salts, oils or other products. Therefore, it is very important that after leaving the jacuzzi we clean deeply, that way the structure will prevent staining.
It is also advisable to perform a deep cleaning to achieve remove bacteria and prevent formation of fungus. Remember, bacteria and fungi are caused by humidity and lack of cleanliness.
2. It is recommended that the hot tub is cleaned after use, but if you do not have much time to do it, do not worry. What you should do is devote attention and deep cleaning once a week.
3. To be suitable cleaning must choose special products. Currently you can find many products for cleaning the bathroom, some of them are suitable for bathtubs, showers and jacuzzi, made with substances that help to clean and disinfect waste products found in the structure of the jacuzzi. If your hot tub is made of acrylic materials, I recommend you to use non-abrasive cleaning products, that way you will avoid scratching the surface.
4. Once you apply the cleaner on the surface of the jacuzzi, you have to use a bristle brush semi-rough that is unique for cleaning jacuzzis and rub the entire surface, especially areas where soil residues are .
5. To properly clean the handles of the jacuzzi and all elements of plastic or metal in the area, I recommend you use descaling products. With these products you will achieve remove all the stains that is in the surface of the jacuzzi, especially they remove limescale.
6. The inside of your hot tub should also clean deeply. For this you can use a special product for cleaning jacuzzis or you can simply fill the tub with water and add a cup of bleach. Then turn on the whirlpool for two minutes and allow the mixture to penetrate the system and clean it correctly. Then empty the water and if you see that it has been some residue, use a damp sponge and clean.
Steps to properly clean the showers
- In a spray bottle pour 1/4 cup baking soda, 1/4 cup vinegar and 1/2 cup of ammonia.
- Then apply the product or solution onto the floor, walls and door or shower curtain. Let the solution take effect about two minutes.
- Then use a sponge to rub the shower carefully and to remove the toughest residues, reverse the sponge using nylon. Sigua rubbing the sponge until the shower being cleaned.
- Then spray the solution onto the sponge and use it to rub the handles, faucet and around the key.
- Immediately open the water and rinse the shower.
- Finally, use a clean towel and dry thoroughly shower.
